4K60Hz 4:2:0 HDBaseT™ Extender Set | PoC | RS232 & 2-Way IR Passthrough (4K: 35m / 115ft, 1080p: 70m / 230ft)

The WyreStorm EX-70-G2 is a super-compact HDBaseT extender set capable of transmitting 4K UHD video and HD audio formats up to 35m / 115ft over a Cat5e cable. It is also compatible with HDCP 2.2 protected content and features robust bi-directional passthrough for CEC, IR, and RS-232. The 2-way PoH allows the device to be powered from either end, offering flexible installation options.

AUDIO & VIDEO

Inputs

• Transmitter: 1 x HDMI 19-pin Type A
• Receiver: 1 x HDBaseT 8-pin RJ-45 Female

Outputs

Transmitter: 1 x HDBaseT 8-pin RJ-45 Female

Receiver: 1 x HDMI 19-pin Type A

Output video encoding: HDBaseT Class B

Encoding data rate: 9.2Gbps

End-to-end latency: 10µs (microseconds)

Audio formats: 2ch PCM | Multi-channel up to Dolby Atmos® and DTS-X™

Video resolutions (max)

• 1920x1080p @ 60Hz 16bit
• 3840x2160p @ 30Hz 8bit 4:4:4
• 3840x2160p @ 60Hz 8bit 4:2:0
• 4096x2160p @ 60Hz 8bit 4:2:0

• Supported standards: DCI | RGB
• Maximum pixel clock: HDMI: 300MHz | HDBaseT: 297MHz

COMMUNICATION & CONTROL

• HDMI: HDMI | HDCP (v1 chassis 1.4 | v2 chassis 2.2) | EDID Pass-through | CEC Pass-through | DVI/D supported with adapter (not included)
• HDBaseT: HDMI | HDCP (v1 chassis 1.4 | v2 chassis 2.2) | EDID Pass-through | 2-way PoH | Bidirectional IR
• IR: 1 x IR TX: 3.5mm (1/8in) TS Mono | 1 x IR RX: 3.5mm (1/8in) TRS Stereo
• RS-232: 1 x RS-232: 3-pin Phoenix (v2 chassis only)

POWER

• Power supply: 18V DC 1A
• PoH: IEEE 802.3af 15.4W Max | 2-way
• Max power consumption: Transmitter: 7W | Receiver: 17W