4K60Hz 4:4:4, 5K30Hz 4:4:4 HDBaseT™ Extender Set | Test Pattern | Dolby Vision & HDR | eARC | Audio De-embedding | POH | Low-bandwidth Mode | RS232 | 2-Way IR Passthrough | 4K 60Hz 100m (Cat6a)

The WyreStorm EX3-100-eARC extends 18Gbps A/V signals up to 100 meters over Cat6a. It uses HDBaseT 3.0 technology to transmit 4K HDR and Dolby Vision content at 60Hz. eARC-compatible, it enables audio signal transfer such as Dolby TrueHD/Atmos and DTS-HD MA 7.1 from a smart TV to an eARC-enabled AVR or soundbar.

Flexible control passthrough options including IR, RS-232, and LAN allow control of displays and device interfacing over long distances.

AUDIO & VIDEO

Inputs

• Transmitter: 1 x HDMI
• Receiver: 1x HDBaseT IN, 1x Optical IN

Outputs

• Transmitter: 1x HDBaseT OUT, 1x HDMI Loop Out, 1x Optical Out
• Receiver: 1x HDMI

Video resolutions (max)

• 1920x1080p @ 60Hz
• 3840×2160 @60Hz 4:4:4 12bit (HDR/DV)

• Output Video Encoding: Encoding Data Rate: 10.2Gbps | End to End Latency: 10μs (microseconds)
• Ethernet: Ethernet Pass-through of up to 1Gb

Audio Formats

• HDMI In: 2ch Analog/PCM
• Multichannel: LPCM up to DTS-X , DTS-HD Master Audio, Dolby Atmos
• eARC: 2ch Analog/PCM
• Multichannel: LPCM up to DTS-X and Dolby Atmos

• Supported Standards: DCI | RGB | HDR10 | Dolby Vision | HLG | BT.2020 | BT.2100
•  Maximum Pixel Clock: 600MHz

COMMUNICATION & CONTROL

• HDMI: HDMI | HDCP 2.2 | EDID | CEC Pass-through
• HDBaseT: HDMI | HDCP 2.2 | EDID | RS-232 Pass-through | IR Pass-Through| 2- WAY PoH | CEC Pass-Through
• IR: 1x IR RX: 3.5mm (1/8in) TRS Stereo, 1x IR TX: 3.5mm (1/8in) TS Mono (Transmitter & Receiver)
• RS-232: 1x RS-232: 3-pin Phoenix (Transmitter and Receiver)

POWER

• Power Supply: 12V DC ?A